How to perform basic settings for the Rosemount 3051 pressure transmitter using the TREX handheld communicator.

Previously, our technical editor introduced how to set the Rosemount 3051 pressure transmitter using the 475 handheld communicator, and many users found it very practical. However, some users mentioned that they purchased Emerson's latest handheld communicator TREX and hope the technical editor can explain how to set the Rosemount 3051 pressure transmitter using the TREX handheld communicator. After some searching and practice, today I will introduce how to perform basic settings on the Rosemount 3051 pressure transmitter using the TREX handheld communicator.
1. How to set the device tag number of the Rosemount 3051 pressure transmitter using the Emerson TREX handheld communicator. The specific steps are as follows:
1. Power on, connect the TREX handheld communicator to the Rosemount 3051 pressure transmitter, and select HART.
2. After successful communication, select Online, at which point the specific TREX function menu that can be set for the Rosemount 3051 pressure transmitter will be displayed.
3. Click to select the setup wizard.
4. Click to select basic settings.
5. Device tag number.
2. How to set the measurement unit and damping of the Rosemount 3051 pressure transmitter using the Emerson TREX handheld communicator. The specific steps are as follows:
1. Power on, connect the TREX handheld communicator to the Rosemount 3051 pressure transmitter, and select HART.
2. After successful communication, select Online, at which point the specific TREX function menu that can be set for the Rosemount 3051 pressure transmitter will be displayed.
3. Click to select the setup wizard.
4. Click to select basic settings.
5. Click to select measurement/damping unit.
6. Click to set the measurement unit and damping.
3. How to set the analog output of the Rosemount 3051 pressure transmitter using the Emerson TREX handheld communicator. The specific steps are as follows:
1. Power on, connect the TREX handheld communicator to the Rosemount 3051 pressure transmitter, and select HART.
2. After successful communication, select Online, at which point the specific TREX function menu that can be set for the Rosemount 3051 pressure transmitter will be displayed.
3. Click to select the setup wizard.
4. Click to select basic settings.
5. Click to select analog output.
6. Click to select the main variable as.
7. Click to set the upper limit/lower limit of the main variable's actual range.
4. How to set the alarm/saturation level of the Rosemount 3051 pressure transmitter using the Emerson TREX handheld communicator. The specific steps are as follows:
1. Power on, connect the TREX handheld communicator to the Rosemount 3051 pressure transmitter, and select HART.
2. After successful communication, select Online, at which point the specific TREX function menu that can be set for the Rosemount 3051 pressure transmitter will be displayed.
3. Click to select the setup wizard.
4. Click to select basic settings.
5. Click to select alarm/saturation level.
6. Click to select the alarm type for 1 analog output.
7. Click to set high, low, and retain the most recent output value.
6. Click to set 2 high alarm/3 high saturation/4 low hold/5 low alarm.
6. Click to select 6 configuration alarms and saturation levels.
7. Click to set namur/rosemount/other/exit.