How to debug and set the Siemens transmitter using a handheld device.

When it comes to Siemens, I believe everyone is quite familiar with it, knowing that it is a leading company in the global electronic and electrical engineering field. Due to high demands for productivity, efficiency, speed, and quality, Siemens products have a good reputation and market share in the industrial automation field. Siemens not only has a significant market share in the pressure transmitter market but also has good sales in temperature transmitters. However, when it comes to the debugging and settings of Siemens transmitters, many people are not very clear. Today, our technical editor from Huibo Electromechanical will take the Siemens temperature transmitter TH300 as an example to explain how to debug and set it using a handheld device.
1. How to modify the range of the Siemens temperature transmitter TH300 using the 475 handheld device. The specific steps are as follows:
1. Turn on the power, connect the 475 handheld device to the Siemens transmitter, and select HART.
2. After successful communication, select Online, at which point the specific function menu that can be set for the Siemens temperature transmitter TH300 will be displayed.
3. Click 1.device setup
4. Select and click 3.basic setup, then click 2.zero/span set to modify the zero point and range settings.
2. How to modify the damping of the Siemens temperature transmitter TH300 using the 475 handheld device. The specific steps are as follows:
Steps 1 and 2 are the same as above.
3. Click 1.device setup
4. Click 3.basic setup
5. Select and click 3.damp to modify the damping.
3. How to set up the number of wires for the Siemens temperature transmitter TH300 using the 475 handheld device. The specific steps are as follows:
Steps 1 and 2 are the same as above.
3. Click 1.device setup
4. Click 4.detailed setup
5. Click to select 1.calibration
6. Click to select 1.sensor
7. Click to select 1.process sensor
8. Click to select 1.sensor setup
9. Click to select 4.sensor connection to set up the number of wires for 4 wire.
4. How to modify the degree symbol of the Siemens temperature transmitter TH300 using the 475 handheld device. The specific steps are as follows:
Steps 1 and 2 are the same as above.
3. Click 1.device setup
4. Click 4.detailed setup
5. Click to select 1.sensor
6. Click to select 1.process sensor
7. Click to select 1.sensor setup
8. Click to select 1.sensor type, modify the degree symbol to t100 iec 751.
5. How to set up loop testing for the Siemens temperature transmitter TH300 using the 475 handheld device. The specific steps are as follows:
Steps 1 and 2 are the same as above.
3. Click 1.device setup
4. Click 2.diag/service
5. Click to select 1.sensor
6. Click to select 2.simulation/test
7. Click to select loop test to set up loop testing.
That concludes our discussion on how to perform initial settings for the Siemens temperature transmitter TH300 using the 475 handheld device. We hope that through the learning of the above content, our instrument user friends can apply it in their previous work. If you would like to learn more about related exciting content on Siemens transmitters, feel free to click to view.