How to set the Rosemount 248 temperature transmitter using the 475 Handheld Communicator.

Previously, I talked about the setup steps for the Rosemount 3051 pressure transmitter and the Rosemount 248 temperature transmitter using the 475 hand-held communicator. I believe everyone has already mastered the initial setup for them. Today, we will introduce a commonly used Rosemount 248 temperature transmitter in our working conditions, and see how the 475 hand-held communicator sets up the Rosemount 248 temperature transmitter. I hope everyone can grasp its basic settings.
1. How to modify the Rosemount 248 temperature transmitter using the Rosemount 475 hand-held communicatorRange. The specific steps are as follows:
1. Power on, connect the 475 hand-held communicator to the pressure transmitter, and select HART.
2. After successful communication, select Online, at which point the specific function menu that can be set for the Rosemount 248 temperature transmitter will be displayed.
3. Select and click device setup to perform device settings.
4. Select and click 3.configuration to perform configuration.
5. Select and click 3.Dev output config.
6. Select and click 1.pv range values.
6. Click 1.pv lrv, input setting 0 degrees; click 2.pv urv, input setting 200 degrees.
2. How to modify the damping of the Rosemount 248 temperature transmitter using the Rosemount 475 hand-held communicatorDamping. The specific steps are as follows:
1. Power on, connect the 475 hand-held communicator to the pressure transmitter, and select HART.
2. After successful communication, select Online, at which point the specific function menu that can be set for the Rosemount 248 temperature transmitter will be displayed.
3. Select and click 1.device setup to perform device settings.
4. Select and click 3.configuration to perform configuration.
5. Select and click 2.sensor config.
6. Select and click 1.sensor 1.
7. Select and click 2.sensor 1 setup.
8. Click 3.snsr damp to perform damping settings.
3. How to modify the number of threads of the Rosemount 248 temperature transmitter using the Rosemount 475 hand-held communicatorNumber of threads. The specific steps are as follows:
1. Power on, connect the 475 hand-held communicator to the pressure transmitter, and select HART.
2. After successful communication, select Online, at which point the specific function menu that can be set for the Rosemount 248 temperature transmitter will be displayed.
3. Select and click 1.device setup to perform device settings.
4. Then select and click 3.configuration to perform configuration.
5. Select and click 2.sensor config.
6. Select and click 1.sensor 1.
7. Select and click 2.sensor 1 setup.
8. Click to select 1.2wire to perform thread settings, offset.
4. How to set the graduation number of the Rosemount 248 temperature transmitter using the Rosemount 475 hand-held communicatorGraduation number. The specific steps are as follows:
1. Power on, connect the 475 hand-held communicator to the pressure transmitter, and select HART.
2. After successful communication, select Online, at which point the specific function menu that can be set for the Rosemount 248 temperature transmitter will be displayed.
3. Select and click 1.device setup to perform device settings.
4. Select and click 3.configuration to perform configuration.
5. Select and click 2.sensor config.
6. Select and click 1.sensor 1.
7. Select and click 2.sensor 1 setup.
8. Click snsr, select 1 type to perform graduation number settings.
5. How to modify the loop test of the Rosemount 248 temperature transmitter using the Rosemount 475 hand-held communicatorLoop test. The specific steps are as follows:
1. Power on, connect the 475 hand-held communicator to the pressure transmitter, and select HART.
2. After successful communication, select Online, at which point the specific function menu that can be set for the Rosemount 248 temperature transmitter will be displayed.
3. Select and click 1.device setup.
4. Select and click 2.diagnostic and service.
5. Select and click 1.test/device.
6. Select and click 1.1loop test to perform loop test settings.